MATERIAL SAFETY DATA SHEET 1.Product and Company IdentificationEpoxy molding compound（Environmental protection material） Product name EME-E110G，E120G，E190，E210，E220，E280，ER110，ER120，E11５，E１2５,EG190 Product Codes series Recommened use and restrictions on Use for semiconductor packaging（Environmental protection material） use： Supplier Information、address、 phone numbers Supplier detail： Address Emergency phone number/ Fax phone numbers： Emergency numbers phone Fax phone numbers Emergency phone number (24H) 2.Hazards IdentificationGHShazard classification： GHS label： label Hazard statement： None The product is not classified according to GHS Signal word： None 1.If you do not make security，may lead to the (respiratory organ) organ damage.2.Long-term or repeated exposed，may lead to the (respiratory organ) organ damage.3.Make eyes be hurtedPreventive measures 1.2.3.4.5.6.Get special instructions before useDo not move until you read all the safety precautionsIf have dust hazards, you should make the face protection.Do not inbreathe the dust / fume / gas / vapor / spray.Do not eating, drinking, smoking in use.Wash thoroughly after handling.Accident response Storage Waste dispose IF exposed or concerned: Get medical advice/attention Store in accordance with local/regional In accordance with local / region / national / international regulations to deal with the waste. 3.Composition / Information on Ingredients1 Pure or Mixtures Product name Chemical identity Mixtures EPOXY MOLDING COMPOUND Concentration or Concentration range(% of contents) 60-90%10-30%5-20%0-2%Trade secret Names of ingredient Fused Silica (SiO2) Epoxy resin Phenolic resin Carbon black Metal Hydroxide Cas NO. 14808-60-7 29690-82-2 9003-35-4 1333-86-4 4.First-Aid MeasuresFirst-aid measures for different exposure routes： Inhalation Skin Contact： Eye Contact： Ingestion Remove to fresh air in case of accidental inhalation of vapors or dusts. Get medical attention. Washing with soap and plenty of water. If have any pain, get medical aid immediately. Contact：Flush eyes thoroughly with water for several minutes. Until feel painless. Immediately give plenty of water. If ingest too much, get medical aid immediately. Most important Prolonged exposure may cause skin irritation. symptoms and hazardous effects： Protection of First-aiders： Notes to Physician： Extinguishing Media： Inapplicable extinguishing Media： Special hazards in Fire-Fighting Special Fire-Fighting Special Equipment for the Protection of Firefighters： Dood ventilation and wear goggles and mask. Treat Symptomatically. Treatment may vary with condition of victim and specifics of incident. 5.Fire-Fighting MeasuresSuitable for water, foam, carbon dioxide or dry chemicals. Unknown Unknown Removed the finished and semi-finished products from the scene. Firefighters should wear appropriate protective equipment, firefighting at the windward. Gas mask、Protective gloves、Exposure suit 6.Accidental Release Measures2 Personal Precautions： Environmental Precautions： Avoid ingestion formation of dust. Use personal protective equipments if the dust formation overstep the limit. Put the Raw materials which leak out in to appropriate container or bags. Get together in accordance with general industrial waste, and commission qualified Methods for Cleaning Up： companies to landfill. 7.Safe Handling and Storage Measuresoperation Ventilate a part or all-sided In a well ventilated place if necessary Obtain special instructions before use。 Read all safety precautions before move。 To minimize the dust。 Providing appropriate ventilation equipment in the dust place。Do not breathe in the dust。 Avoid be in touch with eyes。 Use personal protective equipment if required。 To prevent inadequate ventilation，to be equipped with appropriate equipments to help breathing。 To use in well-ventilated place or at outdoors。 Do not eating, drinking or smoking when using。 Wash hands thoroughly after operating。 Be careful when removing and opening the case. Preventive measures Notice for safe disposal Storage： Technical measures Condition for safety storage： Incompatible substances No information available Keep containers tightly closed in a cool, well-ventilated space. Keep dry and cool below 5°C for quality. No information available 8.prevention measures for exposureexposure limits： Component type Data 4 mg/m3 1 mg/m3 form Total dust Carbon black (1333-86-4) TWA Silica (SiO2)（14808-60-7） TWA Engineering Control： Adequate ventilation should be able to remove and prevent the dust or smoke which bring from processing or operation. If the material brings any possible dust by grinding, cutting, Use any appropriate ventilation, make the exposure under the recommended limit. Personal protective equipment： Respiratory protection：wear a suitable respiratory equipment Hand protection：Impervious gloves Eye protection：Safety glasses with side shields if have any dusts Skin and body protection： Use personal protective equipment if need. 3 Specific hygiene measures：Do not inhale the dusts. Do not eating, drinking, smoking in use. forbid to contact with eyes. Wash thoroughly after handling. 9.Physical and Chemical PropertiesAppearance： solid, powder or caky , black Odor threshold：No information available Odor：None PH：7 Melting point：No information available Flammability：(solid，gas)：No information Boiling point/boiling Range：No information available available Flash point：No information available Decompositon temperature：No information Method：No information available available Explosion limits：No information available Autoignition temperature：NA Vapor density：No information available Vapor pressure：NA Solubility：No information available Density：1.6-1.9 Evaporation rate：No information available Partition coefficient n-octanol/water：(log Kow): No information available 10.Stability and ReactivityStability：Stable under recommended storage condition. Possible Hazardous Reactions Occurring under Specific Conditions：Hazardous polymerization will not occur. Conditions to Avoid：Keep away from heat, moisture and sunlight for quality. Materials to Avoid： Oxidizing agents, acids and alkali. Hazardous Decomposition Products： Hazardous reaction will not occur in using. 11.Toxicological InformationAcute toxicity： Component Silica (SiO2) Skin corrosion / irritation ： Respiratory allergic： Skin allergic： Germ cell mutagenicity： Carcinogenic: No information available Test results Rattus norregicus, Ingestion median lethal dose > 3160mg/kg No information available No information available No information available No information available No information available carcinogenic Serious eye damage / eye irritation： IARC International Cancer Research Center Evaluation of carcinogenicity Silica (SiO2) (14808-60-7) 3 Not sure carcinogenicity on human Carbon Black (CAS 1333-86-4) 2B Possible carcinogenicity on human Sb2O3 (CAS 1309-64-4) 2B Possible carcinogenicity on human Reproductive toxicity： No information available No information available Specific target organ systemic toxicity－－single exposure： Hazards of inhalation： Specific target organ systemic toxicity－－repeated exposure： No information available No information available 4 Chronic toxicity or long-term toxicity： Long-term exposure maybe cause long-term effects 12.Ecological InformationEcological data Ecological toxicity： Persistence Degradability： Bioaccumulation： Flow in soil： Other harmful Effect： 13.Method of deal with the waste.Method of deal with the waste： In accordance with local / region / national / international regulations to deal with the waste including the wrapper which is contaminative. 14.Transport InformationUN number：None assigned. Not be surveillant as a hazard UN proper shipping name：None assigned. Not be surveillant as a hazard Transport hazard class：None assigned. Not be surveillant as a hazard Specific precautionary transport measures and conditions： Keeping the temperature under 10°C. Keeping the case close. And pay attention to leak, overflow, fall down. 15.rule of lawApplicable laws and regulations ： 1.MATERIAL SAFETY DATA SHEET (MSDS) According to《Preparation of chemical safety data sheets for the general rule》(GB16483-2000).Safety instructions given in the additional information.2.TSCA (Toxic substances Control Act): The ingredients of product are all on the 8(b) Inventory List. All raw materials of this product presentation in the 8 (b) directory. 3.EINECS (European Inventory of Existing Commercial Substances): This product complies with the Provision of the European Inventory. This product complies with European supplies regulations. 4.Japan: All raw materials of this product presentation in the Chemistry Substance Management Statute.16.Other Information1.NLM︰Hazardous Substances Database2.HSDB® - Hazardous Substances Database3.IARC (vol. 1～99)References： 4.ACGIH (2009)5.GBZ 2.1-2007 Occupational exposure limits for hazardous agents in the workplacePart1:chemical hazardous agents 6.GB13690-2009: General rule for classification and hazard communication ofchemicals Name：
Address/Telephone：
No information available No information available No information available No information available No information available Organization： 5 Person who Title：
prepared the GHS Date the GHS was prepared： Name： Revised Version：
MSDS information herein is drafted according to our knowledge, experience and understanding. So, it is not necessarily covering allfields of information for sure. The information herein is given in good faith, but no warranty is expressed or implied. 6